356/358 Extra High Security Welded Mesh Fencing - 2D & 3D Fence

358 extra high security mesh fence made from a type of strong welded mesh panel with small mesh opening. It is extremely difficult to penetrate and difficult to attack using conventional hand tools. Has the features of anti-climbing and anti-cutting. The fence name 358 comes from its panel mesh opening 3" × 0.5" × 8 gauge - approximate to 76.2 mm × 12.7 mm × 4 mm mesh opening.

Read more

358 mesh fence Features:

• Anti-climbing: more small openings, no toe or finger holds.
• Anti-cut: robust wire and welded joints make cutting very difficult by bolt cutters and wire cutters.
• High strength welded at each intersection.
• Durable: covering Galfan and polymer powder coating ensure a long service life.
• Mesh fencing specially configured to provide maximum visibility, especially used for emergency and electronic detection systems.

• 358M-01: Anti-cutting 358 mesh fencing

• 358M-02: Anti-climbing 358 mesh fencing

The panels are made of heavy mesh with a high level of security in width mm and a height of mm to mm. Several panels can be installed on top of each other. Thus may be achieved a total height of mm.

358 mesh panel size

• Mesh pattern: 76.2 mm (3") × 12.7 mm (0.5") resistance welded well at each intersection.
• Wire diameter: 4 mm horizontal wire and vertical Wire.
• Weld strength: range 540–690 N/m2.
• Surface treatment: 358 mesh fence panels made from galfan wire, then PVC powder coating (Min. 100 micron), or PVC powder painting. It provides additional protection and increases the potential life span.
• Colors: Green RAL , or Black RAL .
• Installation: Overlapped 75 mm minimum at each post (See pictures 358M-05 and 358M-06) for securing with slotted clamp bars and M8 diameter bolts.

• 358M-03: 358 fence panel with mesh size length 76.2 mm

• 358M-04: 358 fence panel with mesh size height 12.6 mm

Fence posts

• Material: high grade steel for maximum strength and rigidity.
• Post section: 60 × 60 mm, 80 × 80 mm, 100 × 100 mm or 120 × 120 mm.
• Post Plate thickness: 2.5/3.0/4.0/5.0 mm.
• Finish: inside and outside galvanized (Min. 275 g/m2), subsequently covered with a polymer powder (Min. 60 micron ).
• Colors: Green RAL , or Black RAL .
• Post cap: metal caps or plastic cap.
• Metal clips and clamps are hot dip galvanised then powder coating in green or black color.

• 358M-05: When install 358 fence on post need overlapped 75 mm minimum at each post

  Goto BONKFC to know more.

• 358M-06: Black 358 mesh fencing used for protection of residential.

358 high security fences are packaged in plastic film then stored and transported on wooden pallets. Each package is firmly attached to the pallet by a special type tape.

Application: as an anti-climb & anti-cut through barrier, 358 welded wire extra high security fence is designed with maximum security in mind. It is ideally suitable for electronic alarm and detection systems, fencing in prisons, military sites, and airports, industrial and commercial properties, warehouses, power plants, offshore petrochemical facilities, seaport Perimeter, laboratories, secure hospitals, schools, parks, leisure and recreational areas. 358 fence will give them a long lasting and secure perimeter protection with attractive appearance. Generally, 3.60 m height fence is used in schools, parks, leisure and recreational areas, 5.20 m height fence widely used in prison and military establishments.

2D Security Fencing with 4 mm double horizontal wire and 6 mm vertical wire for greater strength.

This panels increase strength by 6 mm vertical wire and additional 4 mm wires at 152.4 mm centres on the inside face. So it has double horizontal wires at 152.4 mm centres. This structure makes the fence panel very rigid and has a higher level of strength and security than common 358 mesh fence. 2D Security Fencing is widely used for schools, industrial sites, infrastructure, and high security areas.

• 358M-08: Green color powder coating 2D security fencing with 6 mm vertical wire and 4 mm double horizontal wire

• 358M-09: Details of 2D security fencing panel installed on post

2D security fencing Specifications

Fence Panel Packing:
1. Plastic film at the bottom to avoid the panel destroyed.
2. 4 metal corners to ensure the panel strong and uniform.
3. wood plate at the top of the pallet.
4. pallet tube size:40*80mm tubes at the bottom vertical position.

Fence Post Packing:
1. Plastic cap cover onto the post.
2. Plastic film + metal pallet for fence post.

If you are looking for more details, kindly visit 358 Fence supplier.